pic1
Tel:+86-755-82599567
Fax:+86-755-61658220
Email:office@bestgo-security.com

G6(GSM+PSTN Alarm System)

G6(GSM+PSTN Alarm System)
Modelㄩ G6(GSM+PSTN Alarm System)
Profileㄩ GSM home alarm system with build-in temperature sensor,Touchpad, LCD Menu

Alarm notification via phone call or SMS.
Extra SMS phone number for system's status.
Alarm memo, entry delay, exit delay
Hybrid alarm, 30 wireless zones, 4 wired zones.
Advanced zone attribute, user-friendly zone names.
Temperature display and signal output
Relay output can be controlled by SMS or APP.
Support user code and installer code
100 alarm log
Reset factory design
Built-in speaker and Microphone
Remote two-way intercom
Built-in siren
SMS alert, when system: Arm/Disarmed, sensor's low battery, AC power failure, phone line disconnect.
Alarm communication via ADEMCO Contact ID protocol.
Backup rechargeable battery, last more than 8 hours
Work with CCTV system, IP camera

 

Working power: AC=100~230V, DC=12V  1A
Static current:<35mA (when not charging)   Alarm current:<120mA
Built-in Li-Ion backup battery: 3.7V 800mAH(rechargeable), Standby: around 24 hours, Full charging time: 8hours
4-Band GSM Module: 850/900/1800/1900Mhz
GSM transmit power: 2W 
Receiving and emitting range: >100m(non-block)
Working condition: Temperature:  -10oC ~ 70oC   Humidity:5%~80%

Basic component:
- Alarm system (control unit) 每 1 pc.
- Wireless PIR detector 每 1 pc.
- Wireless door (gap) sensor 每 1 pc.
- Remote controller每 2 pcs.
- Antenna 每 1pc.
- Wireless Sound&flash 110dB/0.3m 每 1 pc.
- Power adpater 每 1pc.
- User manual 每 1pc

Previous Product Standalone Fingerprint Access Panel(D1)Next ProductA6(GSM Alarm System)