Safety Make Simple

1.What is the working theory of wireless alarm system?

Every wireless alarm system is made up with one control unit (for controlling, like a brain) and
some sensors (for detection, like hands and feet) and sirens. When detecting intruder, sensors
will send signal to control unit. The control unit will activate siren to make alarm sound and at the
same time it can make a phone call to users.

2. What is its configuration and how it works?

We sell at a standard pack, which includes one control unit, one door sensor, one PIR sensor and two remote controllers, one AC- DC12V adapter and one user manual. Wireless sensors must be registered with control unit so that the control unit can recognize the sensors when they send signal to control unit.

3.What is the classification of wireless alarm systems?

Wireless alarm system includes GSM alarm system (dialing out phone numbers by GSM Network, which uses GSM SIM cards) and Telephone auto-dial alarm system (dial out phone number by telephone line). BT-101GSM ,BT-102GSM,BT-103GSM,BT-104GSM and BT-106GSM are GSM Home alarm. The rest are telephone Auto-dial alarms.


BT-101GSM ,BT-102GSM,BT-103GSM,BT-104GSM and BT-106GSM----GSM Alarm system, use SIM card to dial-out.

BT-105,BT-106,CK-236,CK-238,CK-2316,PA-748 and BT-107 -------Telephone line Auto-dial Alarm System. They need telephone
line to dial out alarm phone number for help.

4. How many sensors can a control unit accept?

For GSM alarm system, it can accept 4 sensors per zone, every host could program over 50 detectors at least. For Telephone Auto-dial Alarm (PSTN), it depends on different control unit.

Note: The Sensors mentioned above include door sensors,PIR motion detector,smoke detector,gas detector,etc.

5. What should I do if I want to add more sensors for a control unit?

We have already registered the sensors in standard pack with control unit before delivery. But if users want to add more sensors for this control unit, they must learn how to register more sensors.

The steps as follows:

I. For GSM Alarm system (BT-101GSM ,BT-102GSM,BT-103GSM,BT-104GSM):

Steps of registering:

When power on, the system will search the GSM Internet and when the LED is turned red which shows it finds the Internet. At this moment, you will have 20 seconds to register the sensors. For Door sensor, separate the two parts of the door sensor and remove them back when there is a beep from control panel, which shows successful. For PIR Sensor, switch the power button to the ¡°on¡±, it will beep and then turn it back to ¡°off¡±. For smoke and gas detectors, there are a black point inserted in the left side. Press it and it will beep sound from the control panel, which shows successful. That is all!

II. For Telephone Auto-dial Alarm (PSTN)

Different systems own different register way, you could contact us for details. Whatever it's very easy for you to do it.

6. How to trigger the sensors to make it register with control unit?

When the control panel is powered, start to register them. For door sensors, just remove the two parts of door sensor and remove back, it will beep and the status LED flashes, which shows successful. And for PIR Sensors, you can turn the switch to ¡°on¡± and the system will beep, which shows successful and then turn it to ¡°off¡± to avoid false alarm. For remote controllers, you can press any key on its panel (three keys on it), and the system also beeps. For gas and smoke detectors, there is a black switch on the left side; you can press it to register it with control unit. For break sensors, you can put it on a desk and then shake the desk, it will send a signal to control panel. The control panel will response with a beep sound, which shows successful. After finishing registering, please enter # to exist (two beeps.)

7. How long is the distance between sensors and control units?

80 meters in an open air (without block). Indoor use, it depends on the specific environment

How to Choose the Best Smoke Alarms for Your Home?

Properly installed and maintained, smoke alarms are one of the best and least expensive ways to provide early warning when a fire begins. Smoke alarms save lives, prevent injuries and minimize property damage by alerting residents to a fire hazard.

Smoke Alarm Facts
According to the National Fire Protection Association (NFPA), in one out of five homes that have smoke alarms, none of the units work, mainly due to dead, missing or disconnected batteries.
Nearly half of the nation's fire deaths occur in the four percent of homes that do not have smoke alarms. (NFPA)
The risk of dying in homes without smoke alarms is twice as high as it is in homes that have working smoke alarms. (Consumer Product Safety Commission)
Types of Smoke Alarms
There are two types of smoke alarm sensor technology.

Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than Photoelectric alarms.
Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than Ionization alarms.
Studies show both types will effectively detect either type of fire. For optimal protection, install both smoke alarm technologies in your home in order to maximize the chances of escape.
Cooking fires ¨C most of which involve flammable liquid - are the leading cause of home fires and home fire injuries.
Smoking materials are the leading cause of home fire deaths, and often begin in the bedroom, living/family room or den. Nearly half of all victims are asleep.
Bestgo offers photoelectric and ionization smoke alarms, as well as a dual-sensor model, which incorporates both technologies.
Learn more about this topic and view recommendations from leading fire and safety experts.

Smoke Alarm Tips
Install smoke alarms on every floor of your home, in hallways, inside bedrooms and outside of sleeping areas. On average, families have less than three minutes from the time the first smoke alarm sounds to escape a fire. The sooner you hear an alarm, the more time you will have to get out.
Replace smoke alarms every 10 years. Alarms monitor the home every minute of every day and their lifespan is not infinite. If you don't know how old your alarm is, you should replace it.
Test your smoke alarm per manufacturer¡¯s instructions and replace the batteries as needed.
Gently vacuum your smoke alarm monthly to prevent dirt from blocking the sensor.
Do not disable a smoke alarm in nuisance situations. Do not "borrow" smoke alarm batteries for other uses such as toys or radios.
Develop and practice a fire escape plan with the family, so that everyone knows what to do when the alarm sounds.

How To Buy A Good Burglar Alarm System?

On September 26, 2006 in Lawrence, MA, an unusual story spread on the news. The story was about an old lady who encountered a burglar inside her house. According to her, she was awakened by stranger wearing black clothes and armed with a curved knife in his hand. The burglar never demanded for anything big from her except for an amount of $40. The victim resisted and insisted that she have no money and forced the burglar to go out of her house. The story becomes unusual because it seldom happens that a burglar leaves a home without getting something or even kills the resident.

Good enough that this 85 year old lady was not hurt by the burglar and her home was not destroyed at all. The old lady could have been killed by the burglar; her daughter who was sleeping that time may have also been harmed. The old lady admits in an interview later that after the incident her peace of mind was robbed and felt that she is no longer safe in her own house.

{Not all burglary incidents are as clean and harmless as the story~Not all burglary incidents are as harmless and clean as the story}. Most of the time, such incidents are too destructive that it does not just harm property but also life.

If the old lady could have installed a burglar alarm system in her house maybe the burglar may have been captured by the police. Also, she could have locked her bedroom immediately before the burglar broke into it.

Home burglar alarms are very important security instruments. The importance of these instruments is not just limited to securing property and life but also giving peace of mind to residents.

These instruments are more commonly used in stores and other business establishments. In fact they were designed to be mounted in such establishments. Nowadays, Home burglar alarms kits are already available for home installation.

Here are ways on how to acquire burglar alarm kits for residential use:

-- Know the physical attributes of your home. Most particularly, take note of all entry points in your home like doors, windows, basements exit, fire exits, etc. When these entry points are integrated with the alarm system, you have a higher chance of detecting unauthorized entry.

-- Look for security companies that offers home burglar alarm system kit installation.

-- Take note that there are several types of alarm systems. In many cities, there are alarms that do not make sounds but can detect movements and can alarm the police directly. There are also alarms that sounds very loud to let you and the neighbors know of an illegal entry and can drive away thieves. The next type is the telephone relayed alarm that when an illegal entry is detected, the system dials the police or the security company¡¯s number and plays a recorded message alarming the latter that something wrong is going on. These three are just some of the many types of home security systems. Look for one that you deem most suitable for your home and your location.

--Draft a good physical plan where you want to put the control panel, the keypad and other necessary component included in the kit. The control panel is basically a switch that turns the alarm on and off. Also ensure that this important component is installed in the most strategic location.

-- You may also choose the general alarm. There are alarms that do not just detect movements but as well as temperature changes, flood, smoke, etc.